|
The PEG-1
Our
Pneumatic Exhaust Generator is easy to install and use.
This efficient design has no moving parts so it can never wear
out and supplies the required exhaust flow for one Laurell spin
processor. The only requirement is a CDA or N2 pressure source
An exhaust flow
is created when 25 – 100psi (1.7 – 6.9bar) of a gas is supplied to
the generator. The flow is created by a Venturi effect and by
varying the input pressure a differential pressure of 0.5 – 3.5” H2O
can be achieved. 50 psi (3.4 bar) generates a volumetric flow rate
of approximately 20 CFM (0.57 M3/min.)
It is easy to
clean and disassemble, if necessary. |
we accept most major credit cards
